HYDRAULIC SWING CYLINDERS

4110 Series

 

These cylinders are Pull-Type cylinders where the piston rotates by 90° (CW or CCW) during the swing stroke and then travels in a straight line during the clamping stroke. A solid one-piece construction ensures perfect alignment of internal components and maximum clamping rigidity.

 

Specifications

  • Type: Double Acting, Top Mounted.
  • Bore diameters: 40 mm to 63 mm.
  • Clamping forces up to 900 kgf.
  • Rated pressure: 160 kg/cm².
  • Standard clamping stroke: 14 mm.
  • Special bores and longer strokes available on request.

 

Application

Hydraulic Swing Cylinders are used for clamping where it is necessary to keep the clamping area clear for  unrestricted loading and unloading of work pieces.

* We offer a wide range of custom built
Hydraulic Swing Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC SWING CYLINDERS

4120 Series

 

These cylinders are Pull-Type cylinders where the piston rotates by 90° (CW or CCW) during the swing stroke and then travels in a straight line during the clamping stroke. A solid one-piece construction ensures perfect alignment of internal components and maximum clamping rigidity.

 

Specifications

  • Type: Double Acting, Bottom Mounted.
  • Bore diameters: 40 mm to 63 mm.
  • Clamping forces up to 900 kgf.
  • Rated pressure: 160 kg/cm².
  • Standard clamping stroke: 14 mm.
  • Special bores and longer strokes available on request.

 

Application

Hydraulic Swing Cylinders are used for clamping where it is necessary to keep the clamping area clear for unrestricted loading and unloading of work pieces.

* We offer a wide range of custom built
Hydraulic Swing Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC VERTICAL SWING CYLINDERS – TYPE 1

4170 Series

 

This is a double acting cylinder where the job gets clamped in the piston push direction. During de-clamping, the strap is almost vertical leaving the clamping area clear for easy loading and unloading of work pieces. The clamping strap is connected to the piston rod by a linkage mechanism.

 

Specifications

  • Type: Double Acting, Top Mounted.
  • Bore diameters: 25 mm to 80 mm.
  • Strokes: 24 mm to 60 mm.
  • Clamping forces up to 3200 kgf.
  • Rated pressure: 160 kg/cm².
  • Special bores available on request.

 

Application

Vertical swing cylinders are used for clamping where it is necessary to keep the clamping area clear for unrestricted loading and unloading of work pieces.

* We offer a wide range of custom built
Hydraulic Vertical Swing Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC VERTICAL SWING CYLINDER – TYPE 2

4171 Series

 

This is a double acting cylinder where the job gets clamped in the piston push direction. During de-clamping, the strap is almost vertical leaving the clamping area clear for easy loading and unloading of work pieces. The clamping strap is connected to the piston rod by a linkage mechanism.

 

Specifications

  • Type: Double Acting, Top Mounted.
  • With Manifold port
  • Bore diameters: 25 mm to 80 mm.
  • Strokes: 18.5 mm to 49 mm.
  • Clamping forces up to 877 kgf.
  • Rated pressure: 70 kg/cm².
  • Special bores available on request.

 

Application

Vertical swing cylinders are used for clamping where it is necessary to keep the clamping area clear for unrestricted loading and unloading of work pieces.

* We offer a wide range of custom built
Hydraulic Vertical Swing Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

PNEUMATIC SWING CYLINDERS

4180 Series

 

These cylinders are Pull-Type cylinders where the piston rotates by 90° (CW or CCW) during the swing stroke and then travels in a straight line during the clamping stroke. A solid one-piece construction ensures perfect alignment of internal components and maximum clamping rigidity.

 

Specifications

  • Type: Double Acting, Bottom Mounted.
  • Bore diameter: 50 mm.
  • Clamping forces up to 85 kgf.
  • Rated pressure: 15 kg/cm².
  • Standard clamping stroke: 14 mm.
  • Special bores and longer strokes available on request

 

Application

Pneumatic Swing Cylinders are used for light clamping when it is necessary to keep the clamping area clear for unrestricted loading and unloading of work pieces.

* We offer a wide range of custom built Pneumatic Swing Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC BLOCK CYLINDERS

4210 Series

 

Hydraulic Block cylinders are very compact, heavy duty cylinders and can be mounted very easily and in many different ways. High size to force ratio compared to conventional cylinders.

 

Specifications

  • Type: Single & Double Acting.
  • Standard bore diameters: 25 mm to 125 mm.
  • Strokes up to 50 mm.
  • Clamping forces up to 24500 kgf.
  • Rated pressure: 200 kg/cm².

 

Application

Suitable for short stroke clamping applications. Can also be used for positioning, supporting, lifting and pulling.

* We offer a wide range of custom built Hydraulic Block Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC PULL CYLINDERS

4311 Series

 

Pull cylinders are similar in size and construction to Swing Cylinders. A solid one-piece construction ensures perfect alignment of internal components and maximum clamping rigidity.

 

Specifications

  • Type: Single and Double Acting.
  • Standard bore diameters: 40 mm to 63 mm.
  • Standard stroke: 15 mm.
  • Clamping forces up to 4600 kgf.
  • Rated pressure: 200 kg/cm².
  • Special bores and longer strokes available on request.

 

Application

Simple and quick arrangement ensures easy assembly for standard clamping application

* We offer a wide range of custom built Hydraulic Pull Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC COMPACT CYLINDERS

4360 Series

 

These cylinders are double acting, solid piston cylinders and are very compact in the axial direction.

 

Specifications

  • Type: Double Acting.
  • Bore diameters: 20 mm to 50 mm.
  • Stroke: 10 mm to 25 mm.
  • Clamping forces up to 2900 kgf.
  • Rated pressure: 150 kg/cm².
  • Special bores and longer strokes available on request.

 

Application

Extensively used where height is a constraint. The simple mounting arrangement makes the cylinders very easy to use

* We offer a wide range of custom built Hydraulic Compact Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC THREADED BODY CYLINDERS

4411 Series

 

This is a compact, push type, single acting spring return cylinder. The threaded body allows for adjustable mounting and the cylinder also has fixed mounting holes at the base.

 

Specifications

  • Type: Single acting, Spring return.
  • Bore diameters: 16 mm to 63 mm.
  • Strokes: 15mm to 100 mm.
  • Clamping forces up to 5000 kgf.
  • Rated pressure: 200 kg/cm².
  • Special bores and longer strokes available on request.

 

Application

These cylinders can be used for direct clamping as well as for positioning and support. The threaded body makes the cylinder easy to install

* We offer a wide range of custom built
Hydraulic Threaded Body Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC MANIFOLD CYLINDERS

4430 Series

 

These are push type, single acting, spring return cylinders which can be fitted either in tapped holes in the fixture or in a manifold.

 

Specifications

  • Type: Single acting, Spring return.
  • Bore diameters: 8 mm to 32 mm.
  • Strokes: 4 mm to 16 mm.
  • Clamping forces up to 1600 kgf.
  • Rated pressure: 200 kg/cm².

 

Application

Suitable for mounting close together. Multiple piping can be eliminated. Ideal for compact fixtures

* We offer a wide range of custom built
Hydraulic Manifold Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC MINI THREADED CYLINDERS

4451 Series

 

These cylinders are single acting push type cylinders and can be threaded directly into tapped holes in the fixture down to the hexagonal/slotted section of the cylinder’s body.

 

Specifications

  • Type: Single Acting, Push Type.
  • Bore diameters: 8 mm to 32 mm.
  • Stroke: 5 mm to 20 mm.
  • Clamping forces up to: 1600 kgf.
  • Rated pressure: 200 kg/cm².
  • Special bores and longer strokes available on request.

 

Application

Used in multiple clamping fixture to hold small parts. These cylinders can be arranged in a clamping bar.

* We offer a wide range of custom built
Hydraulic Mini Threaded Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC HOLLOW PISTON CYLINDERS

4610 Series

 

This clamping device is a single acting, spring return, push type cylinder with a through hole in the piston.

 

Specifications

  • Type: Single acting, Spring return.
  • Thrust force up to: 5000 kgf.
  • Strokes: 10 mm and 25 mm.
  • Rated pressure: 210 kg/cm².
  • Special sizes and longer strokes available on request.

 

Application

This cylinder can be mounted on the existing fixtures by attaching it to or inserting it over the stud. The stud length may be increased as required. The mounting arrangement can be made to achieve maximum clamping efficiency

* We offer a wide range of custom built
Hydraulic Hollow Piston Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC DIE CLAMPING CYLINDERS

4650 Series

 

Die clamping cylinder is a pull type, spring return cylinder. An integral ‘T’ suitable to 28mm ‘T’ slot, is provided to the piston rod of the cylinder.

 

Specifications

  • Type: Single Acting, Spring return.
  • Standard clamping stroke: 8 mm.
  • Pull force up to 10500 kgf.
  • Rated pressure: 200 kg/cm².

 

Application

These cylinders are widely used for the quick change of Dies and Tools on Hydraulic Presses

* We offer a wide range of custom built
Hydraulic Die Clamping Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)

HYDRAULIC UNIVERSAL CLAMPING CYLINDERS

4710 Series

 

This is strictly a push type cylinder which can be easily installed and consists of a solid body held in position by a locking ring.

 

Specifications

  • Type: Double acting.
  • Bore diameters: 25 mm to 63 mm.
  • Stroke: 32 mm to 64 mm.
  • Push forces up to 6220 kgf.
  • Rated pressure up to 210 kg/cm².

 

Application

These cylinders are used as lifting and clamping cylinders in machine and fixture building. They can be inserted in the smooth through hole and fixed at different levels by means of a locking ring

* We offer a wide range of custom built
Hydraulic Universal Clamping Cylinders

catalogue
(Pdf) 2D Drawing (Pdf)
2D Drawing (Autocad) 3D Drawing (Step)